Click image to view full size image
Product character:
1,Filter element diameter is densification, even and high efficiency on filtration. As the particle will be “bridging” in the pore canal ,it will prevent the particle which owns a smaller diameter than the pore, the filtration effection gets a rate beyound 98%.
2,High cleanliness of itself,non-pollution to the water.
3,Corrosion preventive to the acid, alkali, etc chemical reagent and organic solvent.
4,High strength,it will not deformation when filtration in-out differential pressure is 0.4Mpa.
5,Low cost,can be used repeatedly by washing,so it will lower the cost
Filter element specification:
1,Filter element diameter(mm): OD 30/65,ID 28/65
2,Filter element length(mm):250,500,750,1000
3,Filter precision(μm):1,3,5,10,15,20,30,50,70,100
4,Filter type: frame, non-frame ,external sheath
5,Filter element connector:planar,222 type,226 type
6,End cap: planar, fin type
Service condition:
1.Operating pressure≤0.5MPa
2.Differential pressure≤0.35MPa
3.Operateing temperature≤80°C
Pictures:
melt-blown type Pall replacement water filter cartridge
